110/220V High Power H160 Acrylic Flame Polish Machine Polishing Word Crystal Polisher | Инструменты

110/220V High Power H160 Acrylic Flame Polish Machine Polishing Word Crystal Polisher | Инструменты

110/220V High Power H160 Acrylic Flame Polish Machine Polishing Machine

Word Crystal Polishing Machine Acrylic Flame Polisher

Parameter:

Model: H160

Power: 450W

Bright gas production: 75L / H

Voltage: 110 / 220V

Capacity of electrolytic tank: 1L

Application range of flame polishing machine:

1. Product polishing of acrylic crafts

2. Plexiglass flame polishing, crystal word polishing

3. Experimental demonstration of hydrogen and oxygen produced by water electrolysis in schools

Picture showing:

Product manual:

Instructions:

1. Prepare electrolytic solvent

Add purified water to the container, then pour the polishing agent, stir and cool to room temperature

2. Add electrolytic solvent to the tank

Twist the copper cover on the top of the boot, use a funnel to slowly fill the cooled electrolytic solvent close to the normal water level line, and tighten the copper cover

3. Combustion cup

Unscrew the combustion-supporting cup lid, add fresh water or industrial alcohol to the cup (do not exceed half), and screw it back into the cup lid

4. Installation and commissioning

Place the machine on a firm surface, connect the voltage, connect the required gas pipe, turn on the power switch, the ammeter has instructions, and the ammeter indicates zero

5. Ignition, test welding

Hold the flame gun in one hand and unscrew the valve of the gun in an appropriate amount, the direction of the muzzle is toward the neutral position, and then use the lighter to ignite the gun handle valve to adjust the flame size

6. Replenish liquid

Replenishment of water in a timely manner, it is found that the water level of the electrolytic solvent is significantly reduced

7. Change the fluid

Normally clean the electrolytic tank once a month, and replace the electrolytic solvent

NOTE:because the logistic company say the powder can't deliver,

so our packing list is not include the powder.

production:

The advantages of flame polishing machine

1 on-demand production, not storage, compared with bottled gas, safe and convenient.

2 simple raw materials, only hydropower, the boot that is produced is used, economical and practical, good mobility, small size, portability, and can also be suitable for the field operation.

3 focus of flame, the flame is suitable for precision machining.

4 hydrogen oxygen tasteless non-toxic, combustion product is water, no pollution of the environment.

5 oxyhydrogen flame for the carbon free flame welding, the workpiece fastening, no carbon brittleness phenomenon.

The application range of flame polishing machine

1 acrylic handicraft products

2 organic glass flame polishing

Experimental demonstration of water electrolysis to produce hydrogen oxygen 3 primary and middle schools

Product features we at preferential prices, excellent quality, user-friendly equipment operation, quality of service, has won the praise of customers, meet your needs is our biggest wish!

Life 1, polishing machine in 3 years or more timely water, if it is found that the liquid level indicating decreased significantly, it is required to timely water (without electrolytic powder).

2, the current was significantly reduced, amount of filling electrolytic powder.

3, for the first time after use, usually only need "1, 2" work, electrolyte for about 3 months found that dirty black or mixed with alcohol failure when the need to update a, for electrolyte, please put the machine inverted released electrolyte, liquid discharge should be washed after electrolytic tank, and then re filling electrolytic liquid.

4, add water and change the water and power supply should be closed flame gun, slowly unscrew nut with distilled water until no more than "high scale" not less than "low scale" position, tighten the nut reboot.

As water will cause the flame yellow 5, hose, should be timely discharged.

6 storage tank of alcohol, alcohol should not exceed the tank mouth, if beyond the timely unscrew the tank pour off the excess alcohol alcohol.

7, check the hose connection place can not leak.

8, pay attention to the electrolyte is alkaline, such as accidental contamination please rinse with water.

9, after the boot if not bleed, the pressure indication is about 0.1MPA, the current indicator back to zero, does not start, that the machine does not leak, such as deflate the use, the pressure is reduced, the current back to normal, the machine.

10, such as the emergence of tempering implosion phenomenon, don't panic fear, Department of improper operation, leakage or spray gun malfunction, check the gas pipeline, or replace the spray gun.